Project Source Code CMakeLists.txt TempSense.c
Author: learnembeddedsystems
RP2040’s On-Board Temperature Sensor
This tutorial will cover how to use the on-board temperature sensor on the RP2040 chip which is the heart of the Raspberry Pi Pico. You can find the full source code for this project at the bottom of the page. Introduction to the Temperature Sensor The temperature sensor works by measuring the voltage of a… Continue reading RP2040’s On-Board Temperature Sensor
Basic Multicore Pico Project
This article (and video) covers the basics of multicore programming on the Pico and hopefully demonstrate why you would want to use both cores of the Pico. The full project source code is available at the bottom of this article. Introduction When writing complex projects, where timing is an important aspect of your program, seemingly… Continue reading Basic Multicore Pico Project
Using the Serial Output over USB on the Pico
This short project covers how to use the serial output over USB on your Raspberry Pi Pico. Below the video you can find the project source code, and below that you can find a written version of the project. Introduction Using a serial monitor over USB means that you can essentially output data from your… Continue reading Using the Serial Output over USB on the Pico
Pico Blink LED Code
CMakeLists.txt blink_led.c
Blink STM32F4 Discovery’s LEDs using HAL libraries
Project Source Code
Video: STM32F4 Discovery Beginners Tutorial – Blink LEDs
Video Transcript of Blink LED tutorial Introduction Hello and welcome to a short video which will cover how to write a C program in Keil Micro vision 5 which will blink the LEDs on the STM32F4 Discovery Board on and off. There is a written version of this tutorial available along with the final source… Continue reading Video: STM32F4 Discovery Beginners Tutorial – Blink LEDs
VIDEO: How to set up a Keil IDE 5 Project
Transcription Hello and welcome to a short video which will cover how to set up a Keil Micro vision 5 project for use with programming the STM32F4 Discovery Board. There is a written version of this tutorial available if you would prefer, the link is in the description. Firstly, this tutorial assumes that you have… Continue reading VIDEO: How to set up a Keil IDE 5 Project
Arduino Beginners Tutorial: BMP Sensor using I2C
Introduction The BMP family of sensors from Bosch Sensortec are temperature and pressure sensors that are incredibly small and precise (more information on these sensors can be found here). They have many uses in industrial applications as well as hobbyist arduino projects. However, due to their tiny size, handling these sensors can be challenging for… Continue reading Arduino Beginners Tutorial: BMP Sensor using I2C
STM32F4 Discovery Beginners Tutorial: Blink LEDs
Introduction Here we will present a short and straightforward tutorial to cover the basics of using the general-purpose inputs/outputs (GPIO) on the STM32F4 Discovery using the Keil µVision IDE in the C language. Whilst blinking LEDs may seem basic, the process of setting up the GPIO is instrumental in every future project you undertake with… Continue reading STM32F4 Discovery Beginners Tutorial: Blink LEDs